Nice Floating Shelf Installation Instructions

Make sure the arrow on the bracket points up.

Floating shelf installation instructions. When installing on a tile wall install the bracket first and then tile around them if possible. Follow the anchor instructions. It is possible to scribe cut the back of the shelf slightly to reduce or eliminate such gaps.

The metal bracket must be trimmed from the narrow end with a hack saw or another type of metal cutting saw. Determine location and measure First measure the width of your mantel shelf should be 36 48 60 or 72 Or if floating shelf should be 24 36 48 Using a pencil mark on the wall where you would like the left and right side of your mantel shelf or floating shelf to be. Listing the tools you need so you can be fully prepared before you start our instructions also include informative illustrations - learn how to fit your floating shelves here.

If you install the floating shelf to cement wall following tools should be. Tools Needed for Installation. If mounting hole location does not work in your custom install additional holes are easily drilled using a 316 drill bit.

The simplest and most effective is a bead of latex caulking on the back of. This can be done in any number of ways. Use spirit level to ensure bracket is level.

35 chunky box thick hidden bracket floating shelf written installation instructions. Both the Floating Shelf and Metal Brackets must be trimmed an equal amount. Hidden Bracket Floating Shelf - Installation Instructions For written instructions.

Wall Floating Shelves Installation Step 1. The shelf must be secured to the wall so it cannot slide off the bracket later. Using a level draw a discreet line in pencil across the wall to ensure that your shelf will sit straight.